Modify Selection
- Hazard prevention and control:
- Ground control
- or
- Span design
- or
- Pressure arch design
- or
- Roof beam design
- or
- Skin control
- or
- Highwall design
- or
- Support design and selection
- Document types:
- Conference papers
Home Links
Results 1 - 10 of 90
-
7/1/2010 - Conference papersThe paper provides a basic set of input data and a modeling approach that can be used for numerical modeling investigations of various coal mine designs using the FLAC3D software package.
-
7/1/2010 - Conference papersIn this paper, the findings of a survey of roof span stability issues and design practices are presented, and the observed factors contributing to roof instability are discussed.
-
7/1/2009 - Conference papersThis paper presents a description of geologic settings, mining conditions, rockmass characterization with geotechnical risk assessment, analysis, mapping, and control techniques used at an underground stone mine in Central Pennsylvania.
-
2/1/2009 - Conference papersThe load-deformation characteristics and the load capacity of welded wire screen (roof screen) used to control ground fall were evaluated in the laboratory in a specially built test frame.
-
5/1/2007 - Conference papersThis paper discusses the sources used in developing the CMRR, describes the CMRR data collection and calculation procedures, and briefly presents a number of practical mining applications in which the CMRR has played a prominent role.
-
2/1/2005 - Conference papersHighwall stability remains a major concern during highwall mining. Geologic structure (hillseams) and pillar stability are the two major factors affecting highwall stability.
-
8/1/2004 - Conference papersThis article discusses highwall stability, reasons for early pull out of highwall miner holes, and geotechnical engineering and planning factors, as well as operating practices to improve highwall stability and minimize the risk of a trapped miner.
-
8/1/2004 - Conference papersThis paper focuses on a computer simulation used to model roof behavior and rock bolt interaction in a collaborative study of ground behavior, reinforcement performance, and stress redistribution in a coal mine entry under severe horizontal stress.
-
2/1/2004 - Conference papersThe primary goal of this project was to obtain detailed data on the interaction between the mine roof and the support elements for use in modeling studies.
-
8/1/2003 - Conference papersThis paper describes a study where the variations of the magnitude of the horizon stresses in sedimentary deposits in the eastern and Midwestern U.S. are examined with respect to two factors, the elastic modulus of the rock and the site depth.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program